Heat Pump

Trane heat pump offers homeowners an efficient and environmentally friendly way to heat and cool their home. Unlike a furnace, a heat pump does not burn fuel to produce heat. Heat pumps use surrounding heat from the outside air and move it into the home.

 

The heat pump can operate as the main source of heat most days of winter. The ability of the heat pump to transfer heat from outside to your home is called the ‘unit capacity’. The unit capacity depends on the outdoor temperature. A gas furnace or electric air handler can be configured to act as a backup if the heat pump cannot supply all the heat required.

 

The XR and XLi series are the most common heat pump models. More information about these models can be found in the Air Conditioning page, except a heat pump would include a heating efficiency rating as well (HSPF).

 

Please call A Plus Air Systems at (416)-213-0303 to find out more information about a Trane Heat Pump.

Trane XLi Heat Pumps

 

Fill your home with comfortable air month after month, season after season.

System efficiency is measured in SEER, (Seasonal Energy Efficiency Ratio) and HSPF (Heating Seasonal Performance Factor). Similar to miles per gallon in a car, SEER is a measure of the overall efficiency of a complete heating and cooling system on a seasonal basis. To measure the efficiency of heat pumps specifically, HSPF is used. The higher the SEER and HSPF, the greater the system’s energy efficiency, and the lower the overall carbon footprint of your household.

XL18i

Two-stage heating and cooling prevent temperature swings, while providing the efficiency of up to 18.0 SEER and up to 9.5 HSPF. Potentially ENERGY STAR® qualified when installed as part of a matched Trane system.

XL15i

With up to 16.25 SEER and 9.7 HSPF, the XL15i is hardworking, efficient, quiet, and potentially ENERGY STAR® qualified when installed as part of a matched Trane system.

ComfortLink™ II Control Board

Controls communication between components to optimize your comfort and efficiency.

 

Charge Assist™

Charging Simplifies service and maintenance, while improving charge accuracy for enhanced reliability and efficiency.

 

Dual Climatuff® Compressors*

A smaller compressor operates most of the time for maximum efficiency, handing off to the larger compressor when extra cooling is needed.

 

Simplified Two-Wire Connection

Allows for easier installation while reducing the need for structural modification.

 

Full-Sided Louvered Panels

Galvanized steel panels protect internal components while preserving airflow efficiency.

 

Powder-Paint Finish

Virtually indestructible for maximum protection against corrosion and rust.

WeatherGuard™ Fasteners

Zinc-coated for long life and corrosion resistance.

 

All-Aluminum Spine Fin™ Coil

Designed to enhance airflow and heat transfer, while resisting corrosion and leaks far better than traditional copper and aluminum coils.

 

DuraTuff™ Rustproof Basepan

Won’t crack, corrode, rust or warp.

 

Compressor Sound Insulator

Reduces operating noise for a quieter home environment.

 

WeatherGuard II™ Top

Attractive, durable polycarbonate for lasting protection. 12 Integrated Fan System Unique blade-down design improves airflow, enhances performance and reduces sound levels.

 

Integrated Fan System

Unique blade-down design improves airflow, enhances performance and reduces sound levels.

The Climatuff® compressor. A marvel of reliability and performance.

At the heart of every Trane XLi heat pump, you’ll find the Climatuff® compressor, known throughout the industry for its incredible reliability and performance. We don’t buy them off the shelf like other manufacturers; every Climatuff is built to our exacting standards, using only the finest materials and a design that’s been tested in some of the most brutal conditions on earth. Because that’s what it takes to be a Trane.

Put your comfort on cruise control

Trane TruComfort™ Variable Speed systems maintain a consistent temperature with maximum efficiency by automatically making minor, continuous adjustments in output all day long, all night long. The result is efficient, affordable and reliable comfort, like you have never seen before.

Trane TruComfort™ systems eliminate uncomfortable temperature swings

by staying within 1/2° degree of your setting. By automatically reducing its output capacity and through longer run times, Trane TruComfort™ systems operate at more efficient, quieter speeds rather than cycling on and off to maintain your desired comfort settings. The graphic shows output capacity compared to airflow on conventional single and two-stage systems.

Consistent, Quiet Comfort

Trane TruComfort™ systems deliver precise comfort by running at the exact speed necessary to keep your home comfortable. By lowering output capacity and operating speed, they provide efficient and consistent comfort. Additionally, TruComfort™ heat pumps are able to slow fan speeds down as outdoor temperatures drop to reduce cold spots and use of supplemental heat. What’s more, sound levels are an impressive 55 dB on an air conditioner and 54 dB on a heat pump. For sound comparison, a typical home refrigerator operates at 45 dB.

 

Enhanced Humidity Control

Trane TruComfort™ systems efficiently circulate air around-the-clock to keep your home’s humidity levels at a minimum. Longer run times at lower speeds consistently remove more moisture from the air, reducing humidity. These reduced humidity levels will allow you to adjust your system to a more ef ficient setting, while you enjoy improved comfort and efficiency.

XR Heat Pumps. Premium construction, innovative technology, and a comfortable home all year long.

Climatuff® Compressor

Made to Trane’s exacting specifications, it is quiet, efficient, and known throughout the industry for reliability.

 

Spine Fin™ Coil

Trane’s proprietary coil is made of aluminum for greater resistance to corrosion and leaks. The patented design provides low air resistance and enhanced heat transfer for efficiency.

 

DuraTuff™ Basepan

Manufactured to exacting standards and impervious to rust, corrosion, warping or cracking.

 

Corrosion-Resistant Fasteners

Zinc coated fasteners resist corrosion and keep rust from discoloring your XR heat pump.

Baked-On Powder Paint

A finish that is virtually indestructible even if metal gets dented. Maximum corrosion and rust resistant. Attractively blends with any architectural style and outdoor landscape.

 

Full-Sided Louvered Panels

Protects from outdoor hazards and debris like leaves, tree branches and hail. Galvanized steel.

 

Electronic Demand Control

Minimizes defrost cycles and electricity usage by only defrosting when absolutely necessary.

 

Integrated Fan System

Unique blade-down design improves airflow, enhances performance and reduces sound levels.

XR17

With a SEER of up to 17.75 and an HSPF of up to 9.5, you will appreciate the incredible reliability thanks to the Two-Stage Climatuff® compressor and patented, leak-and-corrosion-resistant Spine Fin™ coil. Installed as part of a qualifying system, most models are ENERGY STAR® qualified.

XR16

ENERGY STAR® qualified combinations are available with SEERs up to 16.0 and HSPFs up to 9.5, providing ef ficient per formance all year long. Also included is the ironclad reliability of a Trane Climatuff® compressor and exclusive Spine Fin™ coil.

XR14

A SEER of up to 14.5 and an HSPF of up to 8.5 make it an energy-efficient choice. The Climatuff® compressor and Spine Fin™ coil make it incredibly durable, and a smart choice all year long.

A Plus Air System Inc.  Heating and Air Conditioning
Fee Estimate